Cuttable: white PCB board, can be cut every 3 LEDs at the marked intervals & rejoined by a simple solder or a quick connector.
Brightness: 60 LEDs/M, 300 LEDs/5M, high intensity 5050 Epsitar SMD LEDs, 120-degree wide beam angle,12V working voltage
2 in 1 design: get RGB and RGBWW strip light at the same time, the WARM WHITE color could be used for reading, both indoors and outdoors use
Super water-proof: water-proof rating: IP65, covered with silicone, high strength, high modulus, high stability, and corrosion resistance
RGB+Warm WHITE: red, green, blue, and pure white sub-pixel, higher displaying brightness and saturation, lower consumption, and super use ratio
Specification:
Strip Light:
Color: RGB+ Warm White
LED Quantity: 60LEDs/m, 300LEDs/roll(150pcs RGB LED and 150pcs Warm White LED)
View angle: 120°
Voltage: 12V DC
Current: 4.75A/roll
Power: 57W /roll
Strip width: 10mm PCB Board
Controller:
Supply voltage: DC 12-24V
Remote Batteries: CR2032
Output: 4 CMOS-drain-open output
Connecting Mode: common anode
Max load current: 2A*4CH
Power: 12V<96W, 24V<192W(8A)
Power Supply:
Input: 100-240V AC 50/60Hz
Output : 12V 5.0A
AC Cable length: about 110CM
DC Cable length: about 110CM
DC connector size: 2.1*5.5mm